Key Operator Setting
C Re-enter the password, and
then press [OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
r If you want to change the
password after pressing [OK],
press [Change], and then per-
form from step B.
D Press [OK].
Programming an End Receiver
A Press [Receiver].
B Select a destination using the
Quick Dial Table, and then
press [OK].
9
J
Press [OK] twice.
K
Press [Exit].
L
Press the {User Tools/Counter} key.
The standby display appears.
174
Deleting Personal Boxes
This section describes how to delete
Personal Boxes.
Limitation
r If messages have been programmed
in the box, you cannot delete the
box.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Box Setting].
E
Press [Delete], and then select the
box you want to delete.