When Using Ipp With Smartnetmonitor For Client - Ricoh Aficio 2045e General Settings Manual

Appendix
Banner page
You should not configure a banner
page on NetWare. If you want to
change the banner page setting, al-
ways configure it using Windows.
• Under Windows 95/98/Me, clear
the [Enable banner] check box on the
[Printer Settings] tab in the printer
properties dialog box.
• Under Windows 2000/XP, clear
the [Enable banner] check box on the
[NetWare Settings] tab in the printer
properties dialog box.
• Under Windows NT 4.0, clear the
[Enable banner] check box on the
[NetWare Settings] tab in the printer
properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the
connection from the print server will
be cut off for about 30-40 seconds be-
fore re-connecting. Depending on the
NetWare specification, print jobs may
be accepted, but they will not be
printed during this interval.
When using the machine as a remote
9
printer, wait about two minutes after
resetting before attempting to print.
134
When Using IPP with
SmartNetMonitor for Client
When using IPP with SmartNetMoni-
tor for Client, note the following:
• The network printer can only re-
ceive one print job from SmartNet-
Monitor for Client at a time. While
the network printer is printing, an-
other user cannot access it until the
job is finished. In this case, Smart-
NetMonitor for Client tries to ac-
cess the network printer until the
retry interval expires.
• If SmartNetMonitor for Client cannot
access the network printer and times
out, it will stop sending the print job.
In this case, you should cancel the
paused status from the print queue
window. SmartNetMonitor for Cli-
ent will resume access to the network
printer. You can delete the print job
from the print queue window, but
canceling a print job printed by the
network printer might cause the next
job sent from another user to be in-
correctly printed.
• If a print job sent from SmartNet-
Monitor for Client is interrupted
and the network printer cancels
the job because something went
wrong, send the print job again.
• Print jobs sent from another com-
puter do not appear in the print
queue window, regardless of pro-
tocol.
• If various users send print jobs us-
ing SmartNetMonitor for Client to
network printers, the printing or-
der might not be the same as that
in which the jobs were sent.
• An IP address cannot be used for
the IPP port name because the IP
address is used for the SmartNet-
Monitor for Client port name.