Ricoh Aficio 2045e General Settings Manual page 873

Messages/Second messages
RPCS syntax error.
Selected paper tray is in use
for another function. Please
wait.
Shift tray has a problem. Call
service representative. ^
Staple has been cancelled.
Staple unit is in use for anoth-
er function. Please wait.
DToner is almost empty.
Turn the main power switch
off, then check the card.
Unauthorized user access.
Print job has been cancelled.
USB has a problem.
Causes
Bidirectional transmission
may not be working properly,
or the RPCS™ printer driver
settings may not be correct.
The specified paper tray is in
use by another function, such
as the copier function.
A malfunction occurs when
using the shift function.
Staple printing has been can-
celed.
The staple unit is in use by an-
other function, such as the
copier function.
The toner has almost run out.
The IEEE 802.11b card may
have come off, or an error may
have occurred in the IEEE
802.11b card.
Print job canceled due to user
restrictions.
An error has occurred in the
USB interface.
Error & Status Messages on the Display Panel
Solutions
Confirm the option settings
for the printer driver match
the options installed on the
machine.
Wait until the other function
has finished using the speci-
fied paper tray.
Contact your sales or service
representative.
Check the paper feed direc-
tion, paper orientation and
stapling position.
Wait until the other function
has finished using the staple
unit.
Replace the toner cartridge
with a new one.
Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Check the User Code permis-
sion status.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
4
27