M
Press [OK].
Note
r To change the port number,
press [Change] under Port No..
Enter the port number using the
number keys, and then press [#].
You can enter 1 to 65535.
N
Press [Change] under User Name.
O
Enter the user name, and then
press [OK].
Note
r This is a user name which is au-
thorized to access the folder.
P
Press [Change] under Password.
Q
Enter the user's password, and
then press [OK].
R
Press [Connection Test] to check the
path is set correctly.
S
Press [Exit].
Note
r If the connection test fails, check
the settings, and then try again.
T
Press [OK].
Changing a registered FTP folder
A
Press the {User Tools/Counter} key.
B
Press [System Settings].
C
Press [Key Operator Tools], and then
press [TNext].
D
Press [Address Book Management].
E
Select the user of the registered
folder you want to change.
Press the user (destination) key, or
enter the registered number using
the number keys.
Note
r If you press
for a user by user name/index,
user code, fax destination, or e-
mail address.
F
Press [Folder].
G
Select the items you want to
change.
To change the protocol
A Press [SMB].
B A confirmation message ap-
pears. Press [Yes].
Note
r Changing the protocol will
clear all settings made under
the previous protocol.
C Enter each item again.
Reference
See stepsH to K on p.85 "To
register an SMB folder".
Changing items under FTP
A Press [Change] under Server
Name.
B Enter the new server name, and
then press [OK].
C Press [Change] under Path.
D Enter the new path, and then
press [OK].
E Press
[Change]
Name.
Registering Folders
, you can search
under
User
4
91