Ricoh Aficio 2045e General Settings Manual page 945

Note
r If either [SADF] or [Batch] is
specified when scanning, this
setting is invalid.
r If [Off] is selected, sending will
start automatically after one
page of original is scanned.
r If [Set Wait Time] is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start when addi-
tional originals are placed and
the {Start} key is pressed within
this time. You can end scanning
and begin sending by pressing
the {#} key within this time. If
the specified time has passed,
sending starts automatically
and you do not need to press the
{#} key.
r If [Continuous Wait] is selected,
the machine will wait for addi-
tional originals until the {#} key
is pressed. Scanning will start
when additional originals are
placed and the {Start} key is
pressed. You can end scanning
and begin sending by pressing
the {#} key.
r If originals are placed in the
ADF, sending will start without
waiting for additional originals
after all originals in the ADF
have been scanned even if you
select [Continuous Wait].
r If a paper jam occurs or any of
the following operation is per-
formed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the {#} key
is pressed.
• Changing the settings such
as the scan settings
• Opening the upper cover of
the ADF
• Pressing the {Interrupt} key to
activate the copy mode
v Wait Time for Next Original(s): SADF
When dividing originals and scan-
ning them separately with the
ADF to form a single file, select [Set
Wait Time] or [Continuous Wait] for
the waiting status.
Note
r If [SADF] is specified when scan-
ning, this setting is valid.
r If [Set Wait Time] is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start automatical-
ly when additional originals are
placed within this time. You can
end scanning and begin sending
by pressing the {#} key within
this time. If the specified time
has passed, sending starts auto-
matically and you do not need
to press the {#} key.
r If [Continuous Wait] is selected,
the machine will wait for the ad-
ditional originals until the {#}
key is pressed. Scanning will
start when additional originals
are placed and the {Start} key is
pressed. You can end scanning
and begin sending by pressing
the {#} key.
r Even if originals are placed on
the exposure glass, the machine
will function as the settings.
However, every time originals
are placed, you must press the
{Start} key to start scanning.
Initial Scanner Setup
17
2