Ricoh Aficio 2045e General Settings Manual page 830

Preparing to Print
B
Confirm that "This wizard helps
you install software for: (printer
name)" is displayed, and click [In-
stall from a list or specific location (Ad-
vanced)], and then click [Next].
"Please choose your search and in-
stallation option." appears.
2
C
Select the [Search for the best driver
in these locations.] check box, and
[Include this location in the search:]
check box.
D
Install the printer driver follow-
ing the same procedure as in steps
E J
to for Windows 2000.
Note
When installation is complete, a
printer with its port directed to
"1394_00n" appears in the [Print-
ers and Faxes] folder. ("n" is the
number of printers connected.)
-Disabling the Device
If [Add New Hardware Wizard] ap-
pears every time you restart the com-
puter using an operating system that
does not support SCSI print, or plug
in/take out the cable, disable the de-
vice with the following procedure:
• Windows Me
A In the [Add New Hardware Wiz-
ard] dialog box, confirm that
[Windows has found the follow-
ing new Hardware: IEEE SBP-2
Device] is displayed, and click
[Recommended search for a bet-
ter driver [Recommended]], and
then click [Next].
B When "Windows was unable
to locate the software for this
device." appears, click [Fin-
ish].
36
If you do not want to install the printer
when [Found New Hardware Wizard]
starts when using an operating sys-
tem that supports SCSI print, disable
the device with the following proce-
dure:
• Windows 2000
A In the [Found New Hardware
Wizard] dialog box, click
[Next].
B When "This wizard will
complete the installation for
this Device: Unknown" ap-
pears, click [Search for a suita-
b l e d r i v e r f o r m y d e v i c e
[recommended]], and then
click [Next].
C When "Locate Driver Files"
appears, remove all selec-
tions from [Optional search lo-
cations.], and then click [Next].
D When "Driver Files Search
Results" appears, click [Disa-
ble the device. The Add/Remove
Hardware Wizard in the control
panel can be used to complete
the driver installations.], and
then click [Finish].
• Windows XP
A In the [Found New Hardware
Wizard] dialog box, confirm
"This wizard helps you in-
stall software for: Unknown"
is displayed, and click [Install
from a list on specific location
(Advanced)], and then click
[Next].
B When "Please choose your
search and installation op-
tion." appears, remove all se-
lections from [Search for the
best driver in these locations.],
and then click [Next].