Ricoh Aficio 2045e General Settings Manual page 759

r Deleting a destination specified as
an end receiver from the Address
Book causes the settings for the
end receiver to be deleted. If this is
the case, reprogram the end receiv-
er. If the destination has been
changed, a message is transmitted
to the new destination.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Box Setting].
E
Select a box to program.
When programming a new box,
press [*Not Programed].
Note
r To change a box already pro-
grammed, press it, and then
proceed to step .
F
Press [Transfer Box].
G
Enter a Box name, and then press
[OK].
Reference
"Entering Text", General Set-
tings Guide
Using Key Operator Settings
H
Enter a SUB Code.
Note
r To change the SUB Code, press
[Clear] or the {Clear/Stop} key,
and then try again. To change
Box name, press [Box Name], and
then repeat from step .
I
Specify the condition of registra-
tion.
Programming End Receivers
A Select an End Receiver.
Note
r You can store five End Re-
ceivers.
B Specify End Receivers with
Quick Dials, and then press
[OK].
Note
r You can also specify End Re-
ceivers with Group Dials.
Note
r Repeat from step A to speci-
fy another End Receiver.
9
179