Ricoh Aficio 2045e General Settings Manual page 448

User Tools (Copier/Document Server Features)
v 1 Sided→2 Sided Auto Margin: TtoT
In 1 sided → 2 sided Duplex mode,
you can specify the margins on the
back side.
The margin is set to the same value
of "Back Margin: Left/Right".
Note
r Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
v 1 Sided→2 Sided Auto Margin: TtoB
In 1 sided → 2 sided Duplex mode,
4
you can specify the margins on the
back side. The value set for "Back
Margin: Top/Bottom" is used.
Note
r Default:
• Metric version: Top/Bottom 0
mm
• Inch version: Top/Bottom 0.0"
v Erase Border Width
You can specify the width of the
erased border margins with this
function.
Note
r Default:
• Metric version: 10 mm
• Inch version: 0.4"
v Erase Original Shadow in Combine
In Combine mode, you can specify
whether to erase a 3 mm, 0.1"
boundary margin around all four
edges of each original.
Note
r Default: Yes
96
v Erase Centre Width
You can specify the width of the
erased centre margins with this
function.
Note
r Default:
• Metric version: 10 mm
• Inch version: 0.4"
2
Edit /
2
Note
r The image area of approximately
1.5 mm (0.06") wide on the separa-
tion line may not be copied, when
specifying solid or broken lines.
v Image Repeat Separation Line
You can select a separation line in
Image Repeat mode from None,
Solid, Broken A, Broken B, or Crop
Marks.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note
r Default: None