Ricoh Aficio 2045e General Settings Manual page 594

Transmission Mode
A
Press [Transmission Mode].
1
B
Press [Polling RX].
C
Depending on which method you
are using, select one of the follow-
ing procedures:
Default ID/Free Polling Reception
A Check that [Default ID/Free Polling
RX] is selected, and then press
[OK].
"Deflt ID/Free Poll." is shown
above the highlighted [Polling
RX].
Note
r To cancel Polling Reception,
press [Cancel]. The display
returns to that of step
ID Override Polling Reception
A Select [ID Override Polling Recep-
tion].
14
B Specify a 4-digit ID using the
number keys and [A], [B], [C],
[D], [E], and [F], and then press
[OK].
"ID Override" and the entered
Polling ID are shown above the
highlighted [Polling RX].
r A Polling ID may be any four
r If you make a mistake, press
r To cancel Polling Reception,
D
Press [OK].
The standby display appears.
E
Dial, and then press the {Start}
key.
B
.
Note
numbers (0 to 9) and charac-
ters (A to F), except 0000 and
FFFF.
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
press [Cancel]. The display
returns to that of step
B
.