Ricoh Aficio 2045e General Settings Manual page 586

Transmission Mode
r To cancel the operation, press
[Cancel]. The display returns to
that of step
1
When your e-mail address is
programmed with the user code
If your e-mail address is pro-
grammed with the user code, you
can select whether the machine
sends transmission result by e-
mail.
A Press [Yes] or [No].
Note
r If you select [Yes], a Trans-
mission Result Report is sent
to the programmed e-mail
address after the transmis-
sion so that you can check the
result of transmission.
E
Press [OK] twice.
The standby display appears.
Note
r To check the settings, press
[Transmission Mode].
F
Specify a destination, and then
press the {Start} key.
Note
r You can cancel the transmission
setup for User Transmission.
See p.19 "Canceling a Transmis-
sion".
6
C
.