P.94 "Routing E-Mail Received Via Smtp - Ricoh Aficio 2045e General Settings Manual

Reception Features
r When the SMTP server attempts to route received documents to this machine
while the machine is transmitting an e-mail, the machine will respond to the
SMTP server with a "busy" signal. Then, the SMTP server usually tries resend-
ing the documents until the set timeout.
Reference
p.63 "Auto E-mail Reception", Facsimile Reference <Basic Features>
p.63 "Manual E-mail Reception", Facsimile Reference <Basic Features>

p.94 "Routing E-mail Received via SMTP"

Routing E-mail Received via SMTP
E-mail received via SMTP can be routed to other fax machines. It can also be
routed to destinations programmed as Quick Dial entries or Groups.
GFIFAX4E.eps
5
Preparation
Before routing e-mail received via SMTP, you first must set "SMTP RX File
Delivery Settings" to "On". See p.145 "E-mail Settings" .
Note
r If an e-mail transfer request is received when the "SMTP RX File Delivery Set-
tings" to "Off", this machine responds with an error message to the SMTP
server.
r You can make settings that limit transfer to specified originators. See p.145
"E-mail Settings".
r Using this function, you can also send documents from your e-mail software
to e-mail addresses and G3 fax machines' destinations through this machine
simultaneously. For details about specifying the destinations of fax machines,
see the following.
94
This machine
E-mail: aaaa@abc.company.com
FAX No:212-123-5678
GFIFAX4E