Ricoh Aficio 2045e General Settings Manual page 829

If you send data from your compu-
ter when data is being received
from another client computer,
your data will be printed after
completing the print job for the
other client computer.
When the machine is connected to
the computer properly via the 1394
interface, the appearance of the
icon in the printer window chang-
es.
Windows 2000
Important
In Windows 2000, the optional
IEEE 1394 interface board can only
be used with Service Pack 1 or lat-
er. If the Service Pack is not in-
stalled, the connectable number of
devices in an IEEE 1394 bus is only
one, and the client cannot access
the IEEE 1394 interface board with-
out using an account that has Ad-
ministrator permission.
A
Connect the machine and compu-
ter using the IEEE 1394 interface
cable.
The [Found New Hardware Wizard] di-
alog box appears.
B
Click [Next].
"This wizard will complete the in-
stallation for this Device: Un-
known" appears.
C
Select [Optional search locations:],
and then click [Next].
D
When "Locate Driver Files" ap-
pears, select the [Optional search lo-
cations.] check box and the [Specify
a location] check box, and then
click [Next].
E
Hold down the left {SHIFT} key
and insert the CD-ROM into the
CD-ROM drive.
Keep the left {SHIFT} key held
down until the computer has fin-
ished accessing the CD-ROM.
If the Auto Run program starts,
click [Cancel], and then click [Exit].
F
Click [Browse].
G
Select the printer driver you want
to install. Each printer driver is
stored in the following folders:
• PCL 6: \DRIVERS\PCL6\
WIN2K_XP\(Language)\DISK1
• PCL 5e: \DRIVERS\PCL5E\
WIN2K_XP\(Language)\DISK1
• RPCS™: \DRIVERS\RPCS\
WIN2K_XP\(Language)\DISK1
• PostScript 3: \DRIVERS\PS\
WIN2K_XP\(Language)\DISK1
H
Click [Open].
I
Click [OK].
A printer model selection dialog
box appears.
J
Follow the instructions on the
screen.
Note
When installation is complete,
the printer with its port directed
to "1394_00n" appears in the
[Printers] folder. ("n" is the
number of printers connected.)
Windows XP
A
Connect the machine and the
computer using the IEEE 1394 in-
terface cable.
The [Found New Hardware Wizard] di-
alog box appears.
Installing the Software
35
2