Ricoh Aficio 2045e General Settings Manual page 408

Copying
v Centre/Border
This mode erases both the centre
and edge margins of the original
image.
2
Reference
The erase width is set to 10 mm
(0.4") as a default. You can
change this setting with User
Tools.
p.96 "Erase Centre Width"
p.96 "Erase Border Width"
Note
r The relationship between the orig-
inal orientation and the erased part
is as follows:
L original
1: Erased part
2: 2–99 mm (0.1"–3.9")
56
GCCENT3E
K original
Border Erase
A
Press [Edit/Stamp].
B
Press [Erase].
C
Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set an erase border width with
[n] and [o].
Note
r To change the value entered,
press [n] and [o] to set the
new value.
C Press [OK].