Key Operator Setting
Changing the User Parameters
Important
r We recommend you print and
keep a User Parameter list when
you program or change a User Pa-
rameter. See p.162 "Printing the
User Parameter List".
r Do not change any bit switches
other than those shown on the pre-
vious pages.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Parameter Setting].
E
Select the switch number you
want to change.
9
F
Select the bit number you want to
change.
162
When the bit number is pressed,
the current value switches be-
tween 1 and 0.
Note
r Repeat from step
another bit number for the same
switch.
G
Press [OK].
Note
r To cancel these settings, press
[Cancel]. The display returns to
E
that of step
.
H
E
Repeat steps
the switch settings.
I
After all the settings are finished,
press [Exit].
J
Press the {User Tools/Counter} key.
The standby display appears.
Printing the User Parameter List
Print this list to see the current User
Parameter settings. However, only
items of importance or often-used
items are included in the list.
A
Press the {User Tools/Counter} key.
B
Press [Facsimile Features].
C
Press [Key Operator Tools].
D
Press [Print List] next to [Parameter
Setting].
Note
r To cancel printing a list, press
[Cancel]. The display returns to
D
that of step
.
F
to change
F
and
to change