Ricoh Aficio 2045e General Settings Manual page 634

Other Transmission Features
F
Specify a Receiving Station.
Note
r You cannot enter Receiving Sta-
tion numbers directly. The
4
numbers must be stored in des-
tination lists, Speed Dial, or
Groups in the Transfer Sta-
tion(s). To specify a Receiving
Station, use the procedure de-
scribed below.
r To cancel the Transfer Request,
press [Cancel]. The display re-
turns to that of step
Destination List
A Select [q Quick Dial].
B Enter the registration number
of the destination list where
the Receiving Station is stored.
For example, to select the regis-
tration number stored in Quick
Dial 01 of the Transfer Station,
enter: {0} {1}.
Note
r You can enter up to five dig-
its.
Speed Dial
A Select [qp Speed Dial].
54
B Enter the number of the Speed
Group Dial
A Select [qpp Group Dial].
B Enter the number of the Group
G
To specify another Receiving Sta-
tion, press [Add].
r Press [U Prev.] or [T Next] to see
E
.
H
When you have specified all the
Receiving Stations, press [OK].
I
Press [Exit].
The Transfer Stations and Receiv-
ing Stations are displayed.
J
Press the {Start} key.
Dial code.
Fo r ex a m p l e , t o s el e c t th e
number stored in Speed Dial 12
of the Transfer Station, enter:
{1} {2}.
number.
Fo r ex a m p l e , t o s el e c t th e
number stored in Group Dial 04
of the Transfer Station, enter:
{0} {4}.
Note
the Receiving Stations already
entered. You can select a Re-
ceiving Station from this list and
remove it by pressing [Clear] or
the {Clear/Stop} key.