Directional Magnification (%) - Ricoh Afico 3030 Operating Instructions Manual

Copying
C
Make sure [Size Magnificatn] is high-
lighted.
D
Enter the length of the original
using the number keys, and then
press [#].
Note
2
❒ You can enter sizes within the
following ranges:
Metric
version
Inch
version
E
Enter the length of the copy using
the number keys, and then press
[#].
Note
❒ To change the length after press-
ing [#], select [Original] or [Copy],
and then enter the length.
F
Press [OK] twice.
G
Place original, and then press the
{Start} key.

Directional Magnification (%)

Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
a: Horizontal ratio
b: Vertical ratio
38
1–999 mm
(increments of 1 mm)
0.1"–99.9"
(increments of 0.1")
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge], and then adjust it further,
using [n] or [o].
A
Press [Reduce / Enlarge].
B
Press [Specifd. Ratio].
C
Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the number
keys, and then press [#].
C Press [Vertical].
D Enter the ratio using the number
keys, and then press [#].
E Press [OK].
To specify a ratio using [n] and
[o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n] or
[o].
Note
❒ Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
CP2P01EE
[n] or [o] changes it in in-
crements of 10%.