Chapter 70
Dial Up Interfaces panel
The Dial Up Interfaces panel contains four sub-panels:
Panel
Dial-out Interfaces panel
Global Settings panel
Modem Dial-In Parameters panel
ISDN Dial-In Parameters panel
Dial-out Interfaces panel
On the Dial-out Interfaces panel you can add, configure, and control the connection status of both
ISDN and Modem dial-out interfaces. These interfaces can be used for either Automatic dial-out
service or WAN Failover Service.
ISDN configuration
•
"ISDN interfaces" on page 502
•
"ISDN Dial-out Channel Characteristics" on page 505
•
"ISDN Dial-out Link Parameters" on page 506
•
"ISDN Dial-out IP Address" on page 508
Modem configuration
•
"Modem interface" on page 508
•
"Modem Dial-out Link Parameters" on page 510
•
"Modem Dial-out IP Address" on page 512
Task
Add and configure the dial-out interfaces
Set the WAN Failover interface
Configure and check the status of the modem dial-in interface
Configure and check the status of the ISDN dial-in interfaces
Networking Configuration Guide
501