Dialing Plan: Public Network; Public Dialing Plan Settings - Nortel BCM50 Configuration Manual

Chapter 28

Dialing plan: Public network

The panel described in the following information defines the number planning required for calls
exiting the system to the public telephone network.
The following paths indicate where to access the dialing plan for public network in Element
Manager and through Telset Administration:
• Element Manager: Configuration > Telephony > Dialing Plan > Public Network
• Telset interface: **CONFIG > System Prgrming > Dialing Plan > Public Network
Panels/Subpanels
"Public dialing plan settings" on
page 275
"Public Network Settings" on
page 276
"Public network DN lengths"
on page 277
"Carrier Codes" on page 279 "Adding a carrier code" on
"Configuration notes and tips" on page 270
See also:
• "Dialing plan: System settings" on page 267
• "Dialing plan: Private network settings" on page 281
• "Public networking: Setting up basic systems" on page 289
Click the navigation tree heading to access general information about dialing plans.

Public dialing plan settings

The Dialing Plan - Public Network panel displays the fields that determine dialing information
specific to dialing in or out to a public network from the host system.
Tasks
"Adding a DN Prefix for public
dialing" on page 278
"Modifying a DN prefix" on
page 278
"Deleting a DN prefix" on
page 279
page 280
"Modifying a carrier code" on
page 280
"Deleting a carrier code" on
page 280
Feature notes
"Outgoing public calls routing" on
page 279
Networking Configuration Guide
275