Nortel BCM50 Configuration Manual page 487

Figure 134 Address Ranges tab
Table 106 Address Ranges
Attribute
Included Address Ranges
From IP Address
To IP Address
Add
Delete
Modify
Reserved Addresses
IP Address
MAC Address
Client Name
Client Description
Add
Delete
Value
<IP Address, format
10.10.10.10>
<IP Address, format
10.10.10.10>
<button>
<button>
<button>
<IP address>
<IP address>
<alphanumeric>
<alphanumeric>
<button>
<button>
Chapter 66 DHCP Server Settings panel
Description
An IP address specifying the lowest IP address in a
range.
An IP address specifying the highest IP address in a
range.
Click to add an included address range.
Click to delete a selected address range.
Click to modify a selected address range.
Specify the IP Address that is reserved for this
DHCP client.
Specify the MAC address for the DHCP client to
which this IP address is assigned. The permitted
values is 6 bytes in hexadecimal format.
Specify the name of the DHCP client.
Specify the description that will help to identify the
DHCP client to which this IP address is assigned.
Click to add a reserved address.
Click to delete a reserved address.
Networking Configuration Guide
487