External Access Tones - Nortel BCM50 Configuration Manual

External access tones

You can hear some of the following tones when accessing BCM from remote location.
shows the different types of tones and what they mean.
Table 88 External access tones
Tone
System dial tone
Stuttered dial tone
Busy tone
Fast busy tone
What it means
You can use the system without entering a CoS password.
Enter your CoS password.
You have dialed a busy line pool access code. You hear system dial tone
again after five seconds.
You have done one of the following:
• Entered an incorrect CoS password. Your call disconnects after five
seconds.
• Taken too long while entering a CoS password. Your call disconnects
after five seconds.
• Tried to use a line pool or feature not permitted by your Class of
Service. You hear system dial tone again after five seconds.
• Dialed a number in the system which does not exist. Your call
disconnects after five seconds.
IP trunk lines do not produce tones when accessed from a remote location.
Chapter 52 Call security and remote access
Networking Configuration Guide
425
Table 88