To Configure The Host System; System Set Up For Satellite Systems - Nortel BCM50 Configuration Manual
Nortel bcm50: network guide
Hide thumbs
Also See for BCM50:
- Installation and maintenance manual (335 pages) ,
- Configuration manual (296 pages) ,
- Administration manual (191 pages)
Table of Contents
Advertisement
•
CallPilot or auto attendant is set up and is running for the local system.
•
You have obtained a list of DNs from the remote systems that require mailboxes.
To configure the host system
1
Obtain the voice mail DN by pressing FEATURE 985 on a system telephone.
2
If this setting matches the DN scheme for your system dialing plan, go to step 3.
If this setting does not match the DN scheme for your system dialing plan:
a
To access the DNs panel, select Configuration > Telephony > Dialing Plan.
b In the All DNs table, locate the DN to be changed.
c
Double-click the number in the DN column.
d Enter the number obtained in step 1.
3
To access the Target Lines panel, select Configuration > Telephony > Lines.
4
In the Target Lines table, locate the target line to be assigned.
5
In the Details for Line subpanel, click the Assigned DNs tab.
6
Click Add.
7
Enter the required DN in the DN field.
8
Click OK.
CallPilot programming:
9
Set up CallPilot for voice mail or auto attendant answering:
•
Voice mail: In CallPilot Manager, click Configuration, and the click System Properties.
Ensure that the Enable Redirected DN box is selected.
•
Auto-Attendant: Under the Auto-Attendant heading, click the line record you specified
in step 4 and set the Auto-Attendant to answer after 0 (zero) rings.
VoIP networking note: If you are using H.323 VoIP trunks for central voice mail, you need to set
the following:
•
Ensure that the local gateway protocol is set to SL-1 or CSE, based on the version of the
satellite systems.
•
Ensure that the remote gateways are programmed to route using CDP.
•
Ensure that the remote gateway protocols are set to SL-1 or CSE, based on the version of the
satellite system.
System set up for satellite systems
Systems that are remote to the voice mail system need to ensure that outgoing calls are correctly
directed to the voice mail service on the host system.
Process assumptions:
Chapter 40 Configuring centralized voice mail
Networking Configuration Guide
353
Hide quick links:
Advertisement
Table of Contents
