Public Network Dn Lengths - Nortel BCM50 Configuration Manual

Table 52 Private and Public received numbers (Sheet 2 of 2)
Attribute Value
Public network National
dialing plan
Local
(Subscriber)
Public network code <1 to 7 digits>

Public network DN lengths

The Public network DN length tells the system how long dialing strings will be when entering the
network. For example, if you dial 18005551212 the public network DN length for 1, which is 11,
tells the system to wait until 11 digits are entered before processing the call.
Note: If the values for Public Network DN length are set too short, digits will
be stripped from the dialing string. Conversely, if the values are set too large,
the dialing will take longer to process.
The Public Network DN Lengths/Carrier Codes panel allows you to define DN prefixes and define
the length of the prefixes for public dialing.
Figure 87 Public Network DN Lengths/Carrier Codes panels
Chapter 28 Dialing plan: Public network
Description
Local dialing plan defines a seven-digit numbering scheme.
National dialing plans define an extended number scheme. North
America is set to 10 digits. However, systems in other countries
may have a variable length.
This number concatenates with the Public OLI, which, by default,
is the DN of the device.
Note: In systems running the North American profile, if the Public
OLI contains the public network code, that entry overrides any
entry in this field. Refer to "Line Access tab" in the Device
Configuration Guide (NN40020-300).
Figure 87 illustrates this panel.
Networking Configuration Guide
277