Destination Codes - Nortel BCM50 Configuration Manual

262 Chapter 26 Dialing plan: Routing and destination codes
Table 47 Route settings (Sheet 2 of 2)
Attribute Value
Actions:
Add 1. Under the routes table, click Add.
2. Enter a route number in the dialog box.
3. Click OK to save the new route.
Delete 1. On the routes table, select the route you want to delete.
2. In the Routes pane, click Delete.
3. Click OK.
Modifying Warning: Modifying some route settings may result in dropped calls. Ensure that you
routes: modify the destination codes Absorbed Length setting, if required, if you add or change the
External Number entry.
Changing the Use Pool or DN Types/Service Types values will result in dropped calls if the
lines in the line pool do not support the DN/Service Type selected.
1. On the routes table, select the route you want to change.
2. Click the field you want to change for that route and enter the new value.
3. Press Tab on your keyboard to save the change.
PRI route types
Table 48 lists the service/DN type choices available for PRI lines.
Table 48 PRI Service type/DN type values
PRI Protocol
SL-1
ETSI Euro
ETSI QSIG
NI
DMS-100
DMS-250
4ESS

Destination codes

Once you have the routes configured, set up the dialing plan destination codes that allow users to
access the routes. You can use a route for more than one destination code, as you may require
different codes for the same route to define restrictions or special call designators.
Figure 82 illustrates the Destination codes panel.
NN40020-603 NN40020-603
Description
Type Values
DN Public, Private, Local, National, Special
DN None, Overlap
N/A
Service Public, TIE, Foreign Exchange (FX), OUTWATS
Service Public, Private, TIE, Foreign Exchange (FX), OUTWATS
Service Public, Private, TIE, Foreign Exchange (FX), OUTWATS
Service TIE, OUTWATS, Switched Digital (SDS)