Nortel BCM50 Configuration Manual page 199

3 Set the restriction and remote package scheduling (Restrictions tab):
• Line restrictions: Enter a valid restriction filter for the Normal schedule, and any other
schedules that you want this line to be part of. (outgoing calls)
• Remote Packages: Enter a valid remote access package for the Normal schedule, and any
other schedules that you want this line to be part of (incoming calls from remote users or
private networks)
4 Assign the lines to DNs (Assigned DNs tab)
If you have configured the DNs and know to which telephones the line needs to be assigned,
you can enter those DNs, here. The DN record also can be used to assign lines and line pools
for these lines.
• Appearance Type: Choose Appr only or Appr&Ring if the telephone has an available
button, otherwise choose Ring only. Model 7000 and 7100 telephones have no
programmable buttons, so this must be set to Ring only. (Model 7000 phones, supported in
Europe only.)
• VMsg set: When activated, an indicator on the telephone appears when a message from a
remote voice-mail system is waiting.
Check with your system administrator for the system voice mail setup before changing
this parameter.
Chapter 20 BRI ISDN: BRI T-loops
Networking Configuration Guide
199