Bcm50 Physical Dimensions; Bcm50 Physical Interfaces - Nortel BCM50 System Overview

4
BCM50 supports the complete range of IP telephony capability offered by existing BCM products.
These features are enabled through the use of keycodes and require no additional hardware:
• VoIP Gateway (H.323): up to 12 VoIP trunks
• VoIP Telephony Clients: up to 32 VoIP Telephony clients, supporting the complete range of
Nortel IP phones

BCM50 Physical Dimensions

BCM50 has a compact plastic enclosure that is designed so that you do not need to add additional
hardware to enable features and applications. The compact size and flexible installation options
support fast installs, and accommodate the diverse environmental and physical conditions of small
businesses.
Physical dimensions of the BCM50 main unit and expansion unit:
BCM50 main unit BCM50 expansion unit
Height 2" (5.1 cm)
Width 8.5" (21.6 cm)
Depth 12.5" (31.8 cm)
The BCM50 main unit and expansion unit design features:
• external power supply
• stackable units
• rubber feet and can be installed on desktop or shelf
• optional wallmount bracket
• optional rackmount shelf

BCM50 Physical Interfaces

The BCM50 interfaces are designed so that you do not have to add additional hardware.
Your BCM50 comes with these interfaces:
• Twelve digital station ports that support the complete line of Business Series Telephones.
These ports are accessible through the front pane RJ-21 connector and are enabled through
keycodes.
• Four Analog Loop Supervised Trunks in versions using North American networking
standards. These ports are accessible through the front panel RJ-21 connector and are enabled
through keycodes.
• Four Analog Station interfaces with message waiting and CLID support in versions using
North American networking standards. These ports are accessible through the front panel
RJ-21 connector are enabled through keycodes.
• Page and auxiliary relay output on the front panel RJ-21 connector.
2" (5.1 cm)
8.5" (21.6 cm)
12.5" (31.8 cm)