Nortel BCM50 Configuration Manual page 434

434 Chapter 54 Call security: Restriction filters
Figure 125 Restriction Filters panels
1.Select a restriction filter.
2. Add restricted digits to the
Restriction filter.
Table 89 provides a description of the fields on the Restriction filters panel.
Table 89 Restriction filters and exceptions fields (Sheet 1 of 2)
Attribute Value
Filters table
Filter <00-99>
Restrictions table
Digits <dialstring digit(s)>
Actions:
Add Refer to
NN40020-603 NN40020-603
3. If restricted digits have
exceptions, select the digit.
Description
This is the list number for the filter. This is the number that you
will use on the configuration panels that require restriction filter
entries.
For each filter, enter the restriction digit dial string, based on
what the restriction is for. The dial string is the number that is
restricted from being dialed on the system. Also refer to
"Default filters" on page
Note: The wildcard A (Any) can be used as part of the
dialstring.
"Adding a restriction filter and exceptions" on page
4. Add exceptions.
436.
435.