Nortel BCM50 Configuration Manual page 454

454 Chapter 59 Data networking overview
• Complete the pre-installation checklist. This will make sure that you've made all necessary
preparations for connecting the BCM. For information on completing the pre-installation
checklist, "Data network prerequisites checklist" on page
• Configure your router. If you already have a router on your system, you must make some
modifications to its configuration for use with the BCM. If you have the BCM50a or BCM50e,
you must use the configuration guides for each of those products to set up your router. For
information about configuring the Router, refer to the BCM 4.0a Integrated Router
Configuration Guide (NN40020-500) or the BCM 4.0e Integrated Router Configuration Guide
(NN40020-501).
• Configure IP settings on the BCM. For information about configuring IP settings on the BCM,
refer to "LAN overview" on page
• Configure DHCP on the BCM. For information about configuring DHCP on the BCM, refer to
"DHCP overview" on page
NN40020-603 NN40020-603
449.
475.
465.