Line Pools: Call-By-Call Limits Tab (Pri Only) - Nortel BCM50 Configuration Manual

360 Chapter 41 Dialing plan: Line pools and line pool codes
Table 77 Line Pools: DN access to line pools fields (Sheet 2 of 2)
Attribute
Delete

Line pools: Call-by-Call Limits tab (PRI only)

For PRI lines that provide Call-by-Call services, Bloc line pools have an additional configuration
that allows you to configure service type limitations. For information on PRI protocols, refer to
Table 42.
Figure 111 illustrates the Call-by-Call Limits tab.
Figure 111 Line Pools: Call-by-Call Limits fields
NN40020-603 NN40020-603
Value
1. On the Line Pools table, select the line pool you want to modify.
2. On the DNs tab table, select the DN you want to delete.
3. Under the DNs tab table, click Delete.
4. Click OK.
Description