To Modify An Entry On The Rtp Over Udp Table; To Add New Port Ranges In The Udp Table; To Delete Port Ranges From The Rtp Over Udp Table; Modifying Rtp Over Udp Port Ranges - Nortel BCM50 Configuration Manual

Modifying RTP over UDP Port Ranges

To modify an entry on the RTP over UDP table

1
On the RTP over UDP table, select the entry to modify.
2
Type the new value.

UDP Port Ranges

UDP (User Datagram Protocol) ports are necessary for certain types of network communications.
The UDP table has two settings, as shown in
Table 83 UDP
Attribute Value
Begin <numeric string>
End <numeric string>
Adding new UDP Port Ranges
You can add up to ten port ranges.

To add new port ranges in the UDP table

1 On the UDP table, click Add.
The Add UDP Port Range dialog appears.
2 In the Begin field, type the first port in the range.
3 In the End field, type the last port in the range.
4
Click OK.
The new RTP port range appears in the table.
Deleting UDP Port Ranges
You cannot delete all port ranges from the table. You must keep at least one port range at all times.

To delete port ranges from the RTP over UDP table

1 On the UDP table, select the range to delete by clicking the appropriate row in either column.
2 Click Delete.
The range disappears from the table.
Table 83.
Description
The first port in the port range.
The last port in the port range.
Chapter 49 Port Ranges panel
Networking Configuration Guide
409