To Add New Port Ranges In The Rtp Over Udp Table; To Delete Port Ranges From The Rtp Over Udp Table; Adding New Rtp Over Udp Port Ranges; Deleting Rtp Over Udp Port Ranges - Nortel BCM50 Configuration Manual

408 Chapter 49 Port Ranges panel
Figure 120 Port Ranges panel
Table 82 RTP over UDP
Attribute Value
Begin <numeric string>
End <numeric string>

Adding new RTP over UDP Port Ranges

You can add up to ten port ranges.

To add new port ranges in the RTP over UDP table

1 On the RTP over UDP table, click Add.
The Add RTP Port Range dialog appears.
2 In the Begin field, type the first port in the range.
3 In the End field, type the last port in the range.
4
Click OK.
The new RTP port range appears in the table.

Deleting RTP over UDP Port Ranges

You cannot delete all port ranges from the table. You must keep at least one port range at all times.

To delete port ranges from the RTP over UDP table

1 On the RTP over UDP table, select the range to delete by clicking the appropriate row in either
column.
2
Click Delete.
The range disappears from the table.
NN40020-603 NN40020-603
Description
The first port in the port range.
The last port in the port range.