To Add The Modem Interface; Isdn Dial-Out Ip Address; Modem Interface - Nortel BCM50 Configuration Manual

508 Chapter 70 Dial Up Interfaces panel

ISDN Dial-out IP Address

Figure 139 ISDN Dial-out Interfaces IP Address Specification tab
Table 112 ISDN Dial-out Interfaces IP Address Specification fields
Attribute
Local IP Address Specification
Remote assigned
IP address
Remote IP Address Specification
Assign an IP address
to remote
IP address

Modem interface

BCM supports one V.34 modem connection to, and from, the BCM50.
Caution: Do not modify any of the advanced modem settings on the integrated
router.

To add the modem interface

1 Click Configuration > Resources > Dial Up Interfaces.
2 On the Dial-out Interfaces tab, click Add.
The Add Dial Up Interface dialog box appears.
3 Select Modem from the Interface type drop-down list.
NN40020-603 NN40020-603
Value Description
<check box> When selected, the BCM obtains its IP address from the remote
end.
Default: selected
<IP Address> When the Remote Assigned parameter is disabled, a static IP
address must be configured in this parameter.
<check box> When selected, BCM will assign the IP address in the "IP
Address" field of this section to the remote end of the
connection.
Default: cleared
<IP Address> The local IP address used on the BCM for the dial-out
connection.
Default: 10.11.16.1