Ip Subsystem; Main Panel Tabs: General Settings; Ip Settings Options - Nortel BCM50 Configuration Manual
Nortel bcm50: network guide
Hide thumbs
Also See for BCM50:
- Installation and maintenance manual (335 pages) ,
- Configuration manual (296 pages) ,
- Administration manual (191 pages)
Table of Contents
Advertisement
Chapter 60
IP Subsystem
The IP Settings define the basic and advanced IP address and DNS configuration for the BCM
main unit.
The panel tabs links provide a general description of each panel and definitions of each panel field.
Click one of the following links:
Panel tabs
"Main panel tabs: General settings" on page 455
"Main panel tabs: Internal subnets" on page 458
"Main panel tabs: Dial-out Static Routes" on page 461
Main panel tabs: General settings
The General Settings panel displays the basic IP settings for the BCM main unit. It contains:
•
"IP settings options" on page 455
•
"DNS Settings options" on page 456
•
"MTU option" on page 456
IP settings options
The IP settings options include settings for modifying the IP address information for the BCM.
Modifying IP address information
Warning: Modifying the IP address information for the BCM may cause the BCM to
temporarily lose connectivity to the network.
The IP address fields are read-only. However, you can modify their values using the Modify
button.
Warning: If any of the IP settings are changed in the modify window for IP settings, the
Element Manager will disconnect.
Networking Configuration Guide
455
Hide quick links:
Advertisement
Table of Contents
