To Program The Pri Routing Table; Programming The Pri Routing Table - Nortel BCM50 Configuration Manual

Figure 78 Routing service record: Destination code
Routing service (continued)
Dest code (Services: Routing Services: Dest Codes)
Service Normal
Schedule
DestCode Use route
(max. 12 digits) (001-999)
30 100
31 101
32 102
33 103
Create unique code Specify which route to use

Programming the PRI routing table

The dialing plan must be thoroughly planned out in advance before you program the information
into the BCM system.

To program the PRI routing table

1
Click Configuration > Telephony > Dialing Plan > Routing.
2 Click the route number record you want to use.
3 In the External Number column, type a dialout number (up to 24 digits).
4
Under Use Pool, select a PRI line pool.
The Bloc pools that are displayed depend on how you allocate PRI lines into pools in the line
programming. It is possible to have only pool BlocA, or only pool BlocB, even if there are two
DTMs configured as PRI in the system.
5 Choose a Service Type or DN type:
• DN type: displays for PRI lines with protocol set to SL-1 (MCDN, ETSI Euro).
• Service type: displays for PRI lines with protocol set to NI, DMS-100, DMS-250, 4ESS.
• Service ID: N/A appears where the service requires an ID.
Chapter 25 Dialing plan: Routing configurations
Schedule
Absorb 1st route Absorb
Length Length
(001-999)
0 000 All
0 000 All
0 000 All
0 000 All
Add Destination code to
dialout out string
2nd route Absorb 3rd route
Length
(001-999) (001-999)
000 All 000
000 All 000
000 All 000
000 All 000
Networking Configuration Guide
255
Absorb
Length
All
All
All
All