Nortel BCM50 Configuration Manual page 156

156 Chapter 13 Configuring lines: T1-E&M
• Redirect to: If you want to automatically direct calls out of the system to a specific
telephone, such as a headoffice answer attendant, enter that remote number here. Ensure
that you include the proper routing information.
4 Set the restriction and remote package scheduling (Restrictions tab):
• Use remote package: Enter a valid remote access package for the Normal schedule, and
any other schedules that you want this line to be part of (incoming calls from remote users
or private networks)
• Line restrictions: Enter a valid restriction filter for the Normal schedule, and any other
schedules that you want this line to be part of. (outgoing calls)
• Remote Restrictions: Enter a valid remote access package for the Normal schedule, and
any other schedules that you want this line to be part of (incoming calls from remote users
or private networks)
5 Assign the lines to DNs (Assigned DNs tab) (applicable to manual answer only)
If you have configured the DNs and know to which telephones the line needs to be assigned,
you can enter those DNs, here. The DN record also can be used to assign lines and line pools
for these lines.
• DN: Unique number.
• Appearance type: Choose Appr or Appr&ring if the telephone has an available button,
otherwise choose Ring only. Model 7000 and 7100 telephones have no programmable
buttons, so this must be set to Ring only. (Model 7000 phones, supported in Europe only.)
• Vmsg set: When activated, an indicator on the telephone appears when a message from a
remote voice-mail system is waiting. Check with your system administrator for the system
voice mail setup before changing this parameter.
6 Suggested next steps:
• Dialing plan
"Dialing plan: System settings" on page 267
"Dialing plan: Public network" on page 275
"Dialing plan: Routing and destination codes" on page
• Networking
"Public networking: Setting up basic systems" on page 289
"Public networking: Tandem calls from private node" on page 293
"Private networking: Using destination codes" on page 339
NN40020-603 NN40020-603
259)