Dialing Plan: Line Pools And Line Pool Codes; Line Pools (And Access Codes) - Nortel BCM50 Configuration Manual

Chapter 41

Dialing plan: Line pools and line pool codes

The Line Pools panels allow you to:
• assign access codes to line pools
• add lines to line pools
• assign lines pools to telephones (and view which telephones have line pool assigned)
• set Call-by-Call limits for PRI service types
The following paths indicate where to access line pools settings in Element Manager and through
Telset Administration:
• Element Manager: Configuration > Telephony > Dialing Plan > Line Pools
• Telset interface: **CONFIG > System Prgrming > Access Codes > Line pool codes
Click one of the following links to connect with the type of information you want to view:
Panels
"Line pools (and access codes)" on
page 357
"Line pools: DNs tab" on page 359
"Line pools: Call-by-Call Limits tab
(PRI only)" on page 360
Also refer to:
• "Configuring lines" on page 129
• "Dialing plan: Routing and destination codes" on page 259
• "Line Access - Line Pool Access tab" in the Device
Configuration Guide (NN40020-300)
Click the navigation tree heading to access general information about DN records.

Line pools (and access codes)

The panel in the top frame displays settings that are configured on other panels. The only setting
you can modify on this table is the access code number.
Tasks Features and notes
"Line pool access code notes:"
on page 358
Figure 109 illustrates this panel.
Networking Configuration Guide
357