Nortel BCM50 Configuration Manual page 523

The following tasks can be configured to use dial-up as a primary connection:
• SNMP auto trap dial-out
• modem user secure callback
• CDR records retrieval
• backup to a remote destination
• log collection to a remote destination
• software upgrades
The basic steps to set dial-up as the primary connection are:
1
Create or assign an account with remote access privileges.
2 Create a dial-up interface, and enter the username of the account with remote access privileges
as the dial-out username.
3
Create a static route for the dial-up interface, or assign a dial-out number, depending on the
type of device selected.
4
Tell the application to use the route.
The following example demonstrates how to configure the dial-up interface.
Example: To configure SNMP auto trap dialout
Assign an account remote access privileges
1 Click Configuration > Administrator Access > Accounts and Privileges > View by
Accounts tab.
2
Click Add.
The Add Account dialog box appears. Refer to the Administration Guide (NN40020-600) for
information on configuring an account.
3 Select the account to which you want to assign remote access privileges.
The details panel appears.
4
Select the Group Membership tab.
5 Click Add.
The Add Account To Group dialog box appears.
6
Select Remote Access group.
7 Click OK.
Chapter 70 Dial Up Interfaces panel
Networking Configuration Guide
523