Nortel BCM50 Configuration Manual page 111

Figure 26 Trunk module Port Details panel.
Table 17 describes the fields shown on the Port Values tab panel.
Table 17 Port Values tab
Attribute Value
Port # Read-only
• These are the port numbers of the physical device.
Device type Read-only
• This is the type of module.
Line # 00X-XXX
The number of lines depends on the module type.
Call State or Idle
State Active
Deprovisioned
This field indicates whether a module line or DN is in use or even provisioned.
Version <read-only>
This field indicates the version of firmware running on the module.
DN XXXX
Each port supports one telephone, hence, one DN record.
Addons
Indicates auxiliary items added to the telephony devices or trunks
Add-on
Type
Version
Module type
All modules
All modules
CTM/ CTM/
GATM4 GATM8 Combo DTM-T1
All modules
All modules
All modules
This is a list number.
This field indicates the type of add-on, such as a KIM module.
This field indicates the version of firmware running on the add-on device.
Chapter 9 Configuring telephony resources
DTM-PRI BRI-T
Networking Configuration Guide
111
ASM/
GASM DSM