Capabilities And Preferences - Ip Terminal Details Tab - Nortel BCM50 Installation Manual

Table 16 ATA settings (Continued)
Attribute Values
Disconnect <check box>
Supervision
(GASM only)

Capabilities and Preferences - IP Terminal Details tab

This is a single-terminal display of the terminal information that is also shown in the Telephony
Resources IP Terminal screen. Refer to
description of the fields and buttons on this screen.
Figure 17 Capabilities and Preferences - IP Terminal Details screen
The one unique field is described in the following table.
Table 17 Capabilities and Preferences - IP Terminal Details, DN-unique field
Keep DN alive
Description
Default: N
If you have a modem or fax machine that does not automatically disconnect when
the caller disconnects, you can set this field to Y and the system will disconnect the
line from the device once it receives the disconnect signal from the far end. This
feature is supported only by ASM8+ modules.
Note: The line must be configured as supervised/guarded). Refer to
page 198.
<checkbox> This feature is only relevant to the Nortel Networks IP telephones (2XXX).
When enabled, the system retains the IP telephone DN record even if the IP
telephone becomes disconnected. This occurs as long as the IP telephone
has completed the bootup process. This allows DN-specific features like Call
Forward No Answer and Call Forward on Busy to continue to function even if
the telephone is disconnected.
WARNING: If the system is reset, and the IP telephone is disconnected, the
feature remains inactive until the telephone is reconnected.
Note: A delay of about 40 seconds occurs between when the IP telephone is
disconnected and when Keep DN alive becomes active. During this period,
incoming calls get a busy signal or are rerouted to the prime set, depending
on system programming. The delay also occurs when the IP telephone is
reconnected to the system.
If disabled, the DN record becomes inactive if the IP telephone is
disconnected, which produces a
special features, such as Call Forward, are invoked.
"IP telephone set details" on page 112
Not in Service
59
"Properties" on
for a detailed
prompt if any of the
DN records parameters