Organization of the
Manual
A
T
BOUT
HIS
This guide provides information about configuring your network using the
commands supported on the 3Com
The descriptions in this guide applies to the Switch 4200-G.
The Switch 4200 Family Configuration Guide consists of the following chapters:
CLI Overview—Provides an introduction to the CLI interface.
■
Logging In—Provides information on the different ways to log into the switch.
■
Configuration File System Management—Details the Configuration File
■
System Management.
Address Management—Details hoe to configure the switch on which the
■
Address Manage (AM) feature is enabled.
VLAN Operation—Details how to configure VLANs.
■
DHCP—Details Dynamic Host Configuration Protocol.
■
Voice-VLAN—Details configuration information to create Voice-VLAN.
■
GVRP Configuration—Details GARP VLAN Registration Protocol
■
configuration.
Port Operation—Details how to configure Ethernet ports.
■
Link Aggregation—Details how to aggregating several ports together
■
Port Isolation—Details how to configure ports to be controlled on Layer 2.
■
DLDP—Details overview and fundamentals for Device Link Detection Protocol.
■
MAC Address Table Management—Details MAC address table
■
configuration.
MSTP—Details Multiple spanning tree protocol.
■
802.1x Configuration—Details how to configure 802.1x.
■
HABP Configuration—Details how to configure HABP
■
AAA &RADIUS—Details AAA and RADIUS Configuration.
■
EAD—Details Endpoint Admission Defense Configuration.
■
Centralized MAC address authentication—Details Centralized MAC
■
address authentication configuration.
ARP—Details Address Resolution Protocol table configuration.
■
DHCP—Details Dynamic Host Configuration Protocol.
■
ACL Configuration—Details how to configure QoS/ACL..
■
G
UIDE
®
Switch 4200-G Family.