Display Service-Profile - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display
service-profile
Displays service profile information.
Syntax —
display service-profile {name | ?}
— Displays information about the named service profile.
name
— Displays a list of service profiles.
?
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. New fields added to indicate
the configured SSID default attributes in the service profile.
Examples — The following command displays information for service
profile wpa_clients:
WX4400# display service-profile wpa_clients
ssid-name:
beacon:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
vlan-name=orange
session-timeout=300
service-type=2
Table 64 describes the fields in this display.
Table 64 Output for display service-profile
Field
ssid-name
ssid-type
private ssid-type:
yes auth-fallthru:
<none> WEP Key 2 value:
<none> WEP Key 4 value:
1 WEP Multicast Index:
NO
Description
Service set identifier (SSID) managed by this service profile.
SSID type:
crypto — Wireless traffic for the SSID is encrypted.
clear — Wireless traffic for the SSID is unencrypted.

display service-profile

crypto
web-auth
<none>
<none>
1
321