Viewing And Changing Rf Detection Settings; Viewing Rf Detection Settings; Adding An Entry To The Permitted Vendor Oui List - 3Com WX1200 Reference Manual

284 C 7: C
HAPTER ONFIGURING
Viewing and
Changing RF
Detection Settings
Viewing RF Detection
Settings
Adding an Entry to
the Permitted Vendor
OUI List
W P
IRELESS ARAMETERS
This section contains procedures for configuring RF detection on an
individual switch. For an overview of RF detection and for specific
information about the configuration options, see "Configuring Wireless
Parameters" on page 237.
The tasks available here allow you to configure entries for permit lists, the
ignore list, and the black list. However, you must enter the SSID,
Organizationally Unique Identifier (OUI), or MAC address you are adding
to a list. To add a value to a list by selecting it, use the RF Detection
window instead. (See "Detecting and Combatting Rogue Devices" on
page 459.)
To convert a rogue into a third-party AP, see "Converting a Rogue into a
Third Party AP" on page 473.
To view RF detection settings:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to Wireless.
4 Select RF Detection.
The RF detection settings appear in the Content panel.
To add an entry to the permitted vendor OUI list:
1 Access the RF detection settings:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to Wireless.
d Select RF Detection.
2 In the Task List panel, select Vendor OUIs.
3 Select the device type(s):
Client
AP