Table of Contents
Advertisement
50 Chapter 7: ACSEI Client Configuration Commands on the OSN|M
service acseid condrestart
Syntax
View
Parameters
Description
Examples
<SW5500G> osm connect unit 1
Connected to OSM!
[root@localhost ~]# chkconfig acseid on
service acseid condrestart
Any Linux system directory
None
Use the service acseid condrestart command to restart the ACSEI client
conditionally.
When you execute this command:
If the ACSEI client is running, this command stops the ACSEI client
■
before it restarts the ACSEI client.
If the ACSEI client is not running, this command does not restart the
■
ACSEI client.
# Execute conditional ACSEI client restart on unit 1 (when the ACSEI
client is running), and then view the ACSEI client's running status.
<SW5500G> osm connect unit 1
Connected to OSM!
[root@localhost ~]# service acseid status
acseic-daemon (pid 2335) is running...
[root@localhost ~]# service acseid condrestart
Stopping acseic-daemon: [
Starting acseic-daemon: [
[root@localhost ~]# service acseid status
acseic-daemon (pid 2389) is running...
# Execute conditional ACSEI client restart on unit 1 (when the ACSEI
client is stopped), and then view the ACSEI client's running status.
<SW5500G> osm connect unit 1
Connected to OSM!
[root@localhost ~]# service acseid status
acseic-daemon is stopped
[root@localhost ~]# service acseid condrestart
OK
]
OK
]
Advertisement
Chapters
Table of Contents
