Show Ip Addresses; Display Produced By Show Ip Command - 3Com 3C780 - LinkBuilder FDDI Base Unit User Manual

Show IP Addresses

To display the current IP address, IP netmask, and the Internet broadcast address
of the hub, enter the show IP command. An example of the resulting display is
shown in Figure 5-3.
>sh ip
IP address : 128.56.87.25
Netmask
Broadcast
Figure 5-3. Display Produced by show IP Command
Show MIB Counters
The show mib counters command illustrates one type of command used by the
optional SNMP management application. An example of the display produced
by the show mib counters command is shown in Figure 5-4.
>sh mib counters
Primary MAC fddiMACCounters Grp:
fddiMACFrame-Ct
fddiMACCopied-Ct
fddiMACTransmit-Ct
fddiMACToken-Ct
Figure 5-4. Display Produced by show MIB counters Command
: 255.255.0.0
: 128.56.255.255
= 6417 fddiMACError-Ct
= 765 fddiMACLost-Ct
= 732 fddiMACNotCopied-Ct
= 45202063 fddiMACRingOp-Ct
Using the Hub
5-3
= 0
= 0
= 0
= 0