Habp Client Configuration; Displaying Habp - 3Com 4210 PWR Configuration Manual

234 C 18: HABP C
HAPTER
HABP Client
Configuration

Displaying HABP

ONFIGURATION
Table 171 Configure an HABP server
Operation
Configure the interval
to send HABP request
packets.
HABP clients reside on switches attached to HABP servers. After you enable HABP
for a switch, the switch operates as an HABP client by default. So you only need to
enable HABP on a switch to make it an HABP client.
Table 172 Configure an HABP client
Operation
Enter system view
Enable HABP
After performing the above configuration, you can display and verify your
HABP-related configuration by execute the display command in any view.
Table 173 Display HABP
Operation
Display HABP configuration
and status
Display the MAC address
table maintained by HABP
Display statistics on HABP
packets
Command
habp timer interval
Command
system-view
habp enable
Command
display habp
display habp table
display habp traffic
Remarks
Optional
The default interval for an HABP
server to send HABP request
packets is 20 seconds.
Remarks
-
Optional
HABP is enabled by default. And a
switch operates as an HABP client
after you enable HABP for it.
Remarks
These commands can be
executed in any view.