Port-Security Max-Mac-Count - 3Com Switch 4500 Family Manual

# Configure the intrusion protection mode on Ethernet 1/0/1 as disableport. As a result, when intrusion
protection is triggered, the port will be disconnected permanently.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] port-security intrusion-mode disableport
You can bring up a port that has been permanently disabled by running the undo shutdown command
or disabling port security on the port.

port-security max-mac-count

Syntax
port-security max-mac-count count-value
undo port-security max-mac-count
View
Ethernet port view
Parameters
count-value: Maximum number of MAC addresses allowed on the port, in the range of 1 to 1024.
Description
Use the port-security max-mac-count command to set the maximum number of MAC addresses
allowed on the port.
Use the undo port-security max-mac-count command to cancel this limit.
By default, there is no limit on the number of MAC addresses allowed on the port.
By configuring the maximum number of MAC addresses allowed on a port, you can:
Limit the number of users accessing the network through the port.
Limit the number of security MAC addresses that can be added on the port.
When the maximum number of MAC addresses allowed on a port is reached, the port will not allow
more users to access the network through this port.
1-10