Starting And Quitting; Starting The Zen Support Software - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

Starting and Quitting

1-3

Starting and Quitting

1-3-1

Starting the ZEN Support Software

1,2,3...
This section explains the procedure for starting and quitting the ZEN
Support Software.
1. Select Program/Omron/ZEN Support Software/ZEN Support
Software from the Windows Start Menu. After a moment the
initial screen will be displayed.
2. When display of the opening screen is finished, the following
screen will be displayed. Select Create a new program and click
the OK Button.
Note a) Click Load programs from files and double-click the
OK Button to open existing ladder programs when
starting up the ZEN Support Software. Refer to 2-6-2
Opening Saved Files for the rest of the procedure for
opening existing ladder programs.
b) If uploading a program from the ZEN is selected, the
following will be performed automatically.
• Using the ZEN online function, the contents of the
property settings (ZEN model and Expansion I/O Unit
configuration) will be read from the ZEN and the
settings will be made.
• The program will be transferred from the ZEN to the
computer.
• The ladder diagram will be displayed.
Section 1-3
5