Toro TurfMaster HDX 22215 Service Manual page 80

Traction Cable Installation (continued)
Controls: Service and Repairs
26. Install the 4 (1/4–20 inch) taptite screws securing the belt cover to the frame.
Torque bolts to 110 ± 11 in-lbs. (12 ± 2 Nm).
g296175
27. Install the 1/4–20 inch taptite screw securing the frame cover to the frame.
Torque bolt to 110 ± 11 in-lbs. (12 ± 1 Nm).
g296174
28. Lower the rear cover.
29. Using an appropriate lifting device, lower the rear of the machine to the
ground.
30. Turn the fuel on.
Figure 98
Figure 99
Page 5–36 30 Inch TurfMaster® HDX WPM
3432-730 Rev A