General Information - Toro TurfMaster HDX 22215 Service Manual

General Information

Belts: General Information
There are 3 belts on this unit that will need minimal maintenance for proper
function, 2 belts are for the blade drive and 1 is the transmission drive belt. Blade
drive has a timing belt on the cutting deck and clutching belt from the engine to
the deck. None of the belts on the machine require greasing.
The timing belt is installed so the blades are 90 degrees to each other.
Maintenance consist of cleaning under the belt shield and tension adjustment of
the idler pulley. Not maintaining tension (over tension and under tension), will
cause the loss of material of the flat areas of belt and pulleys.
The BBC belt is tensioned by the bail and cable. See the Controls section.
The transmission belt is self-tensioning and has minimal maintenance.
Page 6–2 30 Inch TurfMaster® HDX WPM
3432-730 Rev A