Table of Contents
Advertisement
Transmission Belt Removal (continued)
Belts: Service and Repairs
g302330
8. To remove belt tension, align the idler pulley with the access hole on the
bottom side of the transmission. Insert a quarter inch screw driver.
Note: Screw driver needs to fit through access hole and the idler pulley slot
securing the pulley/idler arm into position.
g296176
9. Remove the transmission belt from the engine pulley.
Note: Access belt from the front of the mower.
Figure 153
Figure 154
Page 6–14
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
Advertisement
Chapters
Table of Contents
