Toro TurfMaster HDX 22215 Service Manual page 33

Engine Removal (continued)
Engine Installation
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g302385
14. Remove the BBC belt from the pulley.
g296181
15. Remove the BBC belt from rear of mower.
16. Remove the 3 (1/2 inch) bolts securing the engine to the frame.
Note: To remove the front bolt, go through the access hole in the deck with a
10 inch (3/8 inch) drive extension and a ½ inch socket with a universal joint.
17. Remove the engine.
1. Install the engine onto the machine.
2. Install the 3 (1/2 inch) bolts securing the engine to the frame. Torque 500 ±
50 in-lbs. (56 ± 5 Nm).
Figure 13
Figure 14
Page 4–9 Engine: Service and Repairs